Open Daily · 6am–8pm Insured & Workers' Comp · (407) 874-5213
Orlando Spray Foam
Summer Special 25% off spray foam jobs booked this season, Call (407) 874-5213

Metal Buildings & Pole Barns · Central Florida

Florida Heat Doesn't Care About Your Metal Building. We Do.

Closed-cell spray foam is the only insulation that seals a metal building's envelope completely, no air gaps, no condensation, no thermal bridging through the steel. If you're building or retrofitting a pole barn, agricultural structure, workshop, or event venue in Central Florida, this is the job we love most.

Closed-Cell Specialist Stops Condensation 20 Yrs Experience Insured & Workers' Comp
20 YrsIn insulation & construction
5.0 ★Hundreds of 5-star reviews
1-YearManufacturer's warranty
InsuredLiability + workers' comp

Why It Matters

Metal builds different problems than wood. Foam solves them.

Fiberglass batts installed in metal buildings are a waste of money. Here's why, and what actually works.

Condensation Kills Metal Buildings

When warm, humid Florida air hits a cold metal surface, it sweats, constantly. That moisture corrodes steel, ruins stored inventory, grows mold, and destroys electrical systems. Closed-cell foam creates a vapor barrier right on the metal panel, so humid air never reaches the surface temperature where condensation forms. Problem eliminated at the source.

Metal Transfers Heat Like a Radiator

Steel studs and panels conduct heat 300–400× faster than wood. Traditional batts lose 30–40% of their rated R-value to thermal bridging through the metal itself. Spray foam applied directly to the metal panel breaks that thermal bridge, the foam IS the insulation and the air barrier, not something crammed between studs.

Expansion & Contraction Every Day

Metal buildings flex. They expand in the heat, contract at night, every single day. Rigid insulation boards crack at the seams. Batts pull away from the panels. Closed-cell foam flexes with the structure and stays adhered to the metal permanently, maintaining its air seal year after year regardless of the temperature swings.

Structural Rigidity as a Bonus

Closed-cell foam bonds to the metal and actually adds rigidity to the panel, it's a material property of the foam, not marketing. In older metal buildings or agricultural structures, this bonus structural contribution means less wall flex and better performance in high winds. You get insulation and a quiet improvement in structural performance in one application.

Spray foam insulated horse barn interior — open walls and ceiling, pendant lights, Lake County FL
Real Job, Lake County

A Pole Barn Becomes a Wedding Venue

We insulated a metal pole barn that its owner was converting into an event venue. The space needed to be comfortable year-round, guests in formal wear in August Florida heat is not forgiving. After closed-cell spray foam on the walls and roof deck, the building holds temperature the way a climate-controlled building should. The owner reported guests were comfortable even in the peak of summer. That's the kind of job we're built for.

100%
Envelope sealed
Year-round
Comfort maintained
Zero
Condensation complaints
"After the foam, the building held temperature like it should. That's what we came for."

Travis, owner · Orlando Spray Foam

Applications

We handle every type of metal structure.

Agricultural

Livestock & Horse Barns

Animal-safe foam that controls humidity, reduces heat stress, and keeps your animals in a regulated environment year-round.

Event & Lifestyle

Wedding Venues & Event Spaces

Pole barn conversions to climate-controlled spaces. Guests need comfort, spray foam delivers it without a massive HVAC overload.

Commercial Storage

Warehouses & Storage Facilities

Protect inventory from humidity and temperature extremes. Critical for electronics, pharmaceuticals, and sensitive materials.

Workshop / Garage

Metal Shop Buildings

Make your workshop actually comfortable to work in, and eliminate the condensation that rusts your tools and equipment.

New Construction

Steel Frame New Builds

The right time to insulate a metal building is during construction, before walls go up, the job is faster and more thorough.

Retrofit

Existing Metal Buildings

Already built and underperforming? Spray foam works on existing structures. We can reach the panels and spray from the inside.

The Specs

What goes into a metal building foam job.

  • Foam TypeClosed-cell spray polyurethane foam (ccSPF) as the standard for metal buildings. Open-cell used on interior partition walls only where moisture contact isn't a concern.
  • R-Value Per InchClosed-cell delivers R-6 to R-7 per inch, you get high R-values without eating up interior space with thick installations.
  • Application MethodSprayed directly onto the interior metal panel surface in lifts. No fasteners, no gaps at the corrugations, no thermal bridging pathways.
  • Vapor BarrierClosed-cell foam at 2" or greater acts as its own Class II vapor retarder. No separate vapor barrier membrane required in most applications.
  • Cure TimeFoam cures within seconds of application and is fully cured within 24 hours. Typical metal building jobs are complete in 1–2 days depending on size.
  • Coverage Fire CodeAll foam installations include thermal/ignition barrier topcoat per Florida building code, keeping your project code-compliant.

What You Get

  • Complete vapor barrier, condensation eliminated
  • No thermal bridging through steel panels or studs
  • Air seal at every corrugation, seam, and penetration
  • Added structural rigidity to wall panels
  • Sound dampening (machinery, rain on metal roof)
  • Permanent, foam doesn't sag, settle, or pull away
  • 1-year manufacturer's warranty on materials
  • Fully insured contractor, liability + workers' comp
  • Free on-site estimate, firm written quote

Our Process

Four steps from call to finished building.

Step 01

Free On-Site Estimate

Travis comes out, walks the structure, measures the square footage and height, assesses the current state, and gives you a firm written quote. No phone guesses.

Step 02

Prep & Protection

Surfaces are cleaned, any moisture issues addressed, and your equipment or contents are protected before any foam is sprayed.

Step 03

Spray Application

Closed-cell foam applied directly to the metal panels in lifts. Every corrugation, seam, and penetration is sealed. The building gets a complete air and vapor barrier in one pass.

Step 04

Final Walkthrough

We inspect the finished install together, confirm coverage, apply the thermal barrier coat where required, and you sign off on the job. Done.

FAQ

Metal building insulation, the questions we get every time.

Why can't I just use fiberglass batts in my metal building?+

You can, but you'll be disappointed. Fiberglass batts don't stop condensation (they actually wick moisture), they leave thermal bridges at every metal stud and panel rib, and they sag or fall away from the metal surface over time. They're rated for wood-framed walls with a drywall vapor barrier. Metal buildings have entirely different physics. Spray foam was engineered for this application; batts weren't.

How thick does the foam need to be in a metal building?+

For condensation control, you need at least 1.5–2" of closed-cell foam as a vapor retarder. For code-compliant insulation in a climate-controlled space, you're typically looking at 2–4" depending on the climate zone and the use case. Travis will spec the right depth during the on-site estimate based on your actual building and intended use, there's no one-size number.

My metal building already has condensation problems. Can foam fix it?+

Yes, that's actually one of the most common calls we get. Spray foam applied to the interior panel surface eliminates the condensation pathway. We'll assess the current moisture situation before spraying to make sure we're not sealing in active moisture, but in most cases a retrofit spray foam job fixes the sweating problem permanently. We've turned dripping metal buildings into dry, usable spaces.

How long does a metal building foam job take?+

Typical pole barn or metal shop: 1 day. Larger warehouses and commercial structures: 2–3 days depending on square footage and height. You don't need to do anything special to prepare, we handle the surface prep. The foam cures almost instantly, so you can typically be back in the building within 24 hours.

Is the foam fire-rated? Will it pass inspection?+

Open-cell and closed-cell foam require a thermal or ignition barrier in occupied and semi-occupied structures per Florida code, we include that as part of every job. The finished installation is code-compliant. If your building requires a specific fire-rated assembly, let us know and we'll spec the right system.

Ready to seal your metal building the right way?

Tell us your square footage and what you're using it for. Travis will come out, look it over, and give you a firm written number. The 25% summer special is running now.