Open Daily · 6am–8pm Insured & Workers' Comp · (407) 874-5213
Orlando Spray Foam
Summer Special 25% off spray foam jobs booked this season, Call (407) 874-5213

Commercial Spray Foam · Central Florida

Big Buildings. Bigger Savings. Commercial Foam Done Right.

Commercial energy bills in Florida are a serious operating cost. Spray foam insulation, applied correctly at the right spec, is one of the highest-ROI building improvements a property owner or facility manager can make. We've done the math on enough commercial jobs to know: the insulation almost always pays for itself.

New Construction & Retrofit Warehouses & Retail 20 Yrs Experience Insured & Workers' Comp
20 YrsIn insulation & construction
5.0 ★Hundreds of 5-star reviews
1-YearManufacturer's warranty
InsuredLiability + workers' comp

Who We Work With

Every type of commercial property in Central Florida.

Warehousing & Distribution

Warehouses & Storage Facilities

Temperature control, humidity management, and condensation elimination for distribution centers, cold chain adjacents, and general warehousing. Protecting inventory is the primary goal; energy savings are the bonus.

Retail & Mixed-Use

Retail Centers & Strip Malls

Tenant comfort and utility cost control. Strip mall spaces with poor insulation have high A/C bills that landlords and tenants fight over. Foam makes that argument go away.

Office

Office Buildings

Consistent temperature zone-by-zone, reduced HVAC cycling noise, and lower operating costs. Particularly valuable during buildouts and tenant improvements.

New Construction

GC & Developer Projects

We work with general contractors on commercial new builds, coordinating around the project schedule, meeting energy code requirements, and delivering code-compliant documentation. Get us on the schedule early.

Agricultural / Industrial

Cold Storage & Processing

High-performance closed-cell foam for cold storage buildings, food processing facilities, and agricultural structures that need precise humidity and temperature control.

Renovation / Retrofit

Existing Building Retrofit

Buildings built 15–20 years ago typically have insulation that's under-performing. A foam retrofit project often returns enough in energy savings to pay for itself in 3–5 years.

Why Foam Wins Commercially

The numbers that matter on a commercial project.

R-6–7
Per Inch, Closed-Cell

Traditional fiberglass batts deliver R-2.2 to R-3.7 per inch. Closed-cell foam delivers more than double the R-value per inch, meaning you get higher performance without eating interior space.

One Pass
Insulation + Air Barrier

Spray foam is both insulation and air barrier in a single application. Traditional assemblies require separate vapor barriers, air barriers, and insulation layers, more materials, more installation time, more failure points.

Permanent
No Settling. No Sagging.

Blown-in fiberglass settles and loses R-value over time. Spray foam is structural, it bonds to the substrate and stays there for the life of the building. You install it once.

Spray Foam vs. Traditional Insulation

Why commercial owners switch from batts and blown-in.

Spray Foam

  • Air seals AND insulates in one application, no gaps, no thermal bypasses
  • Closed-cell foam is its own vapor barrier (Class II at 2"+ depth)
  • Conforms to irregular surfaces, fills every corrugation, beam, and penetration
  • No settling, no sagging, R-value stays constant for the building's life
  • Adds structural rigidity to wall panels (metal buildings)
  • Eliminates condensation on metal surfaces
  • Code-compliant with proper thermal barrier application

Fiberglass Batts & Blown-In

  • Insulates but doesn't air seal, air bypasses carry heat around the material
  • Requires separate vapor barrier installation
  • Leaves gaps at irregular surfaces, beams, and penetrations
  • Settles 10–20% over 10 years, R-value degrades over time
  • No structural contribution
  • Absorbs moisture; condensation still occurs on substrates behind it
  • Easier to install incorrectly without detection

Working with Contractors

We fit your schedule. No project headaches.

We've worked alongside enough GCs and project managers to know that the worst thing a sub can do is create problems. Here's what you can expect from us.

Step 01

Pre-Bid Walkthrough

We come to the site, understand the spec, and provide a firm bid that accounts for the actual conditions, not a phone estimate that changes at the job.

Step 02

Coordinate on Schedule

We work around your project timeline. Foam application typically needs 24–48 hours of access depending on square footage. We don't hold up the next trade.

Step 03

Clean Application

We protect adjacent surfaces and keep the work area contained. Overspray is addressed before we leave. You don't have to babysit the job.

Step 04

Documentation

We provide the installation documentation you need for inspections and CO, foam type, depth, R-value, and fire barrier compliance. No scrambling at the end.

FAQ

Commercial foam, the questions property owners ask.

Can you work around an operating business without shutting it down?+

Often yes, it depends on the application area and occupancy. For work in unconditioned spaces (attics, exterior wall cavities, roof decks), we can typically stage around business hours. For enclosed spaces, we'll need to coordinate 24–48 hours of access and ventilation. Travis discusses the site logistics during the estimate and we design the schedule around your operation.

Is spray foam safe for occupied commercial buildings?+

During application, spray foam produces fumes that require the application area to be unoccupied and well-ventilated. After the foam cures (typically 24 hours), the space is safe for normal occupancy. We follow all OSHA and manufacturer guidelines and ensure the space is properly ventilated during and immediately after application. This is standard practice and we coordinate it so it doesn't disrupt operations unnecessarily.

What does a commercial spray foam job cost?+

Commercial projects vary too much to quote without a site visit, square footage, height, application type, and access all matter. What we can tell you is that a firm, written bid from us won't change at invoice time. We've found that most commercial owners appreciate knowing the real number upfront rather than an estimate that grows. Call or get a free estimate and we'll come look at the project.

Does spray foam meet Florida commercial building codes?+

Yes. We apply the thermal and ignition barriers required by the Florida Building Code and NFPA 285 where applicable. Our installations come with the documentation you need for inspections. If you have a specific code requirement or energy compliance target (Florida Energy Code, ASHRAE 90.1, etc.), tell us and we'll spec the installation to meet it.

How quickly will we see the energy savings after installation?+

You'll typically see the difference on the first full billing cycle after installation. The A/C runs fewer cycles, utility bills drop, and in humid climates like Central Florida, the dehumidification load decreases noticeably. The payback period on most commercial retrofit projects we've done has been in the 3–6 year range depending on the building's current state and energy rates, though we'd encourage you to get your own analysis rather than rely on a contractor's estimate of your savings.

Commercial project in Central Florida? Let's look at it together.

Travis comes out, walks the building, and puts together a firm written bid. No pressure, no phone guesses. The 25% summer special applies to commercial jobs too.